HDPE Socket Fusion Coupler

01 Raw material:PE100

02 Color:black blue or other colours as required

03 Size:available range from 20mm to 630mm

04 Connecting way:butt fusion and socket fusion

05 Pressure Rating:PN16(SDR11),PN10(SDR17.6)

OEM / ODM
7 *24-Hour service
After-sales

Send E-mail

Introduction
Parameter

Introduction

Welcome customers to visit the factory, or third-party factory inspection is acceptable.

Description of High Density Polyethylene (HDPE) socket fusion fitting

Butt fusion can be used for jointing pipes and fittings 63mm diameter and larger. Since the small diameter pipes’ wall thickness are too thin to butt welding, so the diameter less than 63mm, and the diameter from 63mm to 110mm could be used by socket fusion methods and compression fittings, which are more easy to install. Which are most commonly used for jointing pipes less than 110mm pipes, suitable to both coiled pipes and straight pipes.

Socket fusion fitting including the elbow, tee, coupler, reducer, end caps, and stub ends, ball valves, it is more cost-effective and easy installation methods, please see our socket fusion fittings table to find all the fittings you will need.

The socket fusion technique consists of simultaneously heating both the external surface of the pipe end and the internal surface of the socket fitting until the material reaches the recommended fusion temperature, inspection of the melt pattern, insertion of the pipe end into the socket, and holding it in place until the joint cools. Mechanical equipment is available to hold both the pipe and the fitting and should be used for sizes larger than 2" CTS to help attain the increased force required and to assist in alignment. The procedures in ASTM International F 2620 are applicable.

Advantages of High Density Polyethylene (HDPE) socket fusion fitting

easy welding procedure

simple preparation of the weld

easy handling of the welding equipment

constant quality of the weld

welding bead inside the pipe

axial load connection

applicable for dimensions up to 110 mm

Products Details Information
Product name	High Density Polyethylene (HDPE) socket fusion fitting
Brand	DRD pipeline(Customer brand is available)
Dia Ranges	DN20-110mm(1/2 inch-4 inch)
Pressure Class	from PN10 to PN16
Raw material	PE100, PE80, PE4710, PE3608, PE100RC...
Application	HDPE Fittings for water, oil and gas, mining, marine, drainage, chemical, Irrigation, fire fighting...
Color	Black or Blue
Category	HDPE socket fusion fittings, stub end, tee, elbow, reducer, reducer tee, cross...
Matching products	HDPE pipe fittings, customized PE fittings, DI/ Steel backing ring flanges, valves, water meters, flow gauges, welding machines and tools, etc.
Company / Factory Strength
Production Capacity	120*40ft containers/month
Sample	Free sample could be provided
Quality	QA & QC system, ensure traceability of each process
Warranty	50 years with normal use
Certificates	ISO9001, OHSAS 18001, ISO14001,CE...
Delivery time	5-30 days, depending on the quantity
Test/Inspection	National Standard Laboratory/ Pre-delivery inspection
Service	Research, Design, Manufacture, Test, Sales, Solution Providing, After-sale service
Management	Effective 8S Management System
No. of employees	More than 300 people

Parameter

Item	Fittings Types	Specified Fittings	Diameter(mm)	Pressure Rates(PN-Bar)	Manufacturing Process
1	Socket Fusion Fittings	Coupler/Coupling	OD20-110mm	PN25, PN20, PN16, PN10	Injection Molding
		Reducer/ Reducing Coupler
		Tee
		Reducer Tee
		Stub End
		End Cap
		45 deg elbow		PN16, PN10
		90 deg elbow
2	Threaded- Socket Fusion Fittings	Female coupler	OD20-110mm 1/2'-4'	PN16, PN10	Injection Molding
		Male coupler
		Lifting Stop Valve
		Female Tee	OD20-63mm 1/2'-2'	PN16, PN10
		Male Tee
		Female Elbow 90 Deg
		PP Ball Valves
		Male Elbow 90 Deg	OD20-63mm 1/2'-2'	PN16, PN10
		Stop Valve	OD20-63mm
		Female Union	OD20-63mm 1/2'-2'